Rezisehtnys wrote:The only thing the SQ would give are the wavetables, and they're nifty and all but most of the time it just sounds like a cheesy 80's ROMpler.
commodorejohn wrote:Rezisehtnys wrote:The only thing the SQ would give are the wavetables, and they're nifty and all but most of the time it just sounds like a cheesy 80's ROMpler.
The advantage the SQ-80 would have in this scenario is simply that it has actual analog subtractive filters, so in addition to doing some basic FM-like digital sounds it can do some decent analog polysynth sounds, which are just as important to '80s-type music. As much as I like FM, it just plain can't sound analog - it always sounds like an FM recreation of the basic type of sound and never like an actual analog synth. The SQ-80 doesn't have that problem.
commodorejohn wrote:A DX7 and a freaking harpsichord? Oh, awesome. The battery change is a fairly basic soldering job, but if you've never done one before, some advice: get a proper desoldering iron (one with the rubber bulb connected to a pipe running down into the heating element/tip.) They're about $17 at Radio Shack and they make any such work a thousand times simpler. Also, bite the bullet and spend the extra couple bucks to get a 2032 coin-cell holder with leads attached - I've had to spend up to a half-hour miserably trying to solder leads onto a board-mount coin-cell holder (like they sell at Radio Shack) because those things never, ever have the right spacing to fit the way the batteries are soldered in on old synths.
Users browsing this forum: No registered users and 4 guests