Anyone need a MIDI to SYNC24 interface?

A forum for discussing the pros & cons of buying a particular synth and for advice on buying synthesizers.

Anyone need a MIDI to SYNC24 interface?

Postby Synthead » Sat Jan 28, 2012 10:22 am

I might start selling these guys as built units inside of small project boxes. Would anyone be interested? How much would you pay for one of these guys?
User avatar
Synthead
Newbie
Newbie
 
Posts: 32
Joined: Sun Jun 26, 2011 10:04 pm
Real name: Max
Gear: SCI Pro-One
Roland Juno-106
Ensoniq ESQ-1
Casio VL-TONE
Roland TR-606
Roland MC-505
Korg Electribe ESX-1
BOSS DD-220E
Roland MC-500
Band: Maxwell and the Transistors

Advertisement:

Re: Anyone need a MIDI to SYNC24 interface?

Postby meatwarp » Sat Jan 28, 2012 5:17 pm

The doepfer midi to sync box is about 120-140 usd new, but you can find other converters for under 50 dollars on ebay regularly. roland, korg, and a few other major manufacturers made converters that sell between 20 and several hundred used depending on the features. There area also some kits available from different sources.

I'm sure there are plenty of threads on here about different models. I doubt it's worth it with so many basic options already available in the market.
User avatar
meatwarp
Newbie
Newbie
 
Posts: 27
Joined: Mon Jan 11, 2010 12:42 am
Location: New England

Re: Anyone need a MIDI to SYNC24 interface?

Postby FX23 » Sat Jan 28, 2012 9:25 pm

between 5 and 10 pounds
FX23
Active Member
Active Member
 
Posts: 341
Joined: Sat Jan 12, 2008 4:33 pm

Re: Anyone need a MIDI to SYNC24 interface?

Postby nathanscribe » Sat Jan 28, 2012 10:08 pm

FX23 wrote:between 5 and 10 pounds


What, are you joking? I'm guessing you don't have much electronics DIY experience. That would barely cover a few parts, let alone time and profit.
User avatar
nathanscribe
VSE Review Contributor
VSE Review Contributor
 
Posts: 2936
Joined: Fri Aug 11, 2006 1:03 pm
Location: The right side of the Pennines

Re: Anyone need a MIDI to SYNC24 interface?

Postby ninja6485 » Sun Jan 29, 2012 8:05 am

I would perhaps be interested in a basic, inexpensive one that doesn't require an external power source. Especially if it can take one midi in and turn it into 2 or 3 sync outs. Eg- 303, 808, and 606 all synced from one Midi out; Depending on how tight the sync is I guess. Might not be possible/ practical with tight timing...
This looks like a psychotropic reaction. No wonder it's so popular...
User avatar
ninja6485
Synth Explorer
Synth Explorer
 
Posts: 2068
Joined: Sun Apr 19, 2009 10:13 pm
Location: Exton/ westchester
Gear: Virus Ti, Jx-8p, Juno 60, Radias, Maschine, 101,303,606,707,727,808,909, odyssey, mirage, akai s5K/s2K/s1k, drumtraks, esi4k,M1R, rx5, fizmo,d50
Band: Lyra, The Sun Worshipers

Re: Anyone need a MIDI to SYNC24 interface?

Postby Sir Ruff » Mon Jan 30, 2012 12:02 am

nathanscribe wrote:
FX23 wrote:between 5 and 10 pounds


What, are you joking?


Not joking; just a joke :roll:
Do you even post on vse bro?
User avatar
Sir Ruff
Synth Explorer
Synth Explorer
 
Posts: 3356
Joined: Tue May 09, 2006 11:55 pm
Location: Synthinnati
Gear: Two persimmon modulators and a frequency adjudicator.
Band: Ruff in the jungle

Re: Anyone need a MIDI to SYNC24 interface?

Postby Scories » Mon Jan 30, 2012 12:08 am

On the Kenton pro-solo mkII you can select between MIDI THRU and SYNC24.
Overall, it allows you to control one synth, one extra CV aux in and one SYNC24 device.
Scories
Active Member
Active Member
 
Posts: 623
Joined: Sun Sep 16, 2007 8:57 pm
Location: Québec - CANADA
Gear: Micromoog, JX-3P, Minikorg 700, Z1

Re: Anyone need a MIDI to SYNC24 interface?

Postby synthparts » Mon Jan 30, 2012 12:41 am

There's a guy that makes these boxes that regularly puts them on ebay for $35, seems about right...
Vintage Synth Parts - http://www.synthparts.com
synthparts
Active Member
Active Member
 
Posts: 673
Joined: Sun Oct 09, 2011 12:05 pm
Location: SF Bay Area, CA

Re: Anyone need a MIDI to SYNC24 interface?

Postby kushwonder » Mon Jan 30, 2012 10:32 am

I would like a sync24 to MIDI interface ;)
User avatar
kushwonder
Supporting Member!
Supporting Member!
 
Posts: 90
Joined: Thu Aug 23, 2007 4:06 am
Location: Seattle, WA

Re: Anyone need a MIDI to SYNC24 interface?

Postby meatwarp » Sun Feb 05, 2012 7:37 am

nathanscribe wrote:
FX23 wrote:between 5 and 10 pounds


What, are you joking? I'm guessing you don't have much electronics DIY experience. That would barely cover a few parts, let alone time and profit.


Even if he was joking, if you could do a midi to sync24 box under 40 USD it would be popular, although the market is pretty flooded already.
User avatar
meatwarp
Newbie
Newbie
 
Posts: 27
Joined: Mon Jan 11, 2010 12:42 am
Location: New England

Re: Anyone need a MIDI to SYNC24 interface?

Postby tallowwaters » Mon Feb 06, 2012 4:57 am

I'm shipping this over as it seems to be more about market research than the actual act of selling an item...
Brains can be used like a "stress ball," but only once.
User avatar
tallowwaters
Moderator
Moderator
 
Posts: 5050
Joined: Thu Aug 25, 2005 4:11 am
Location: snake's belly in a wagon rut
Gear: synesthesia, venereal disease, obsessive compulsive disorder, manic depressive disorder, and sensitive skin.

Re: Anyone need a MIDI to SYNC24 interface?

Postby Scories » Wed Feb 08, 2012 1:05 am

A clock to sync a cv sequencer with a MIDI sequencer could be handy in the modular world.
Scories
Active Member
Active Member
 
Posts: 623
Joined: Sun Sep 16, 2007 8:57 pm
Location: Québec - CANADA
Gear: Micromoog, JX-3P, Minikorg 700, Z1

Re: Anyone need a MIDI to SYNC24 interface?

Postby Synthead » Wed Feb 15, 2012 9:21 am

Well, I built one :) This box covers exactly what I needed, just a simple, passive, and inline MIDI to sync24 generator, although it wouldn't be difficult to build a sync24 to MIDI box either, or one that does both. This should also theoretically power multiple sync24 or MIDI devices with a slight redesign. If you guys are interested, I could probably do $40 for one of these. Here's what it looks like:

Image
Image

And a jam of my mc-505, esx-1, juno-106, esq-1, and pro-one playing in sync with my tr-606 using the box above: http://www.youtube.com/watch?v=5arFdKZIMSE
User avatar
Synthead
Newbie
Newbie
 
Posts: 32
Joined: Sun Jun 26, 2011 10:04 pm
Real name: Max
Gear: SCI Pro-One
Roland Juno-106
Ensoniq ESQ-1
Casio VL-TONE
Roland TR-606
Roland MC-505
Korg Electribe ESX-1
BOSS DD-220E
Roland MC-500
Band: Maxwell and the Transistors

Re: Anyone need a MIDI to SYNC24 interface?

Postby nathanscribe » Wed Feb 15, 2012 11:32 am

I'm guessing that if you feed it anything other than pure clock, it sh*ts the bed. To do it properly you'd need to extract clock pulses, start, stop and continue from your MIDI - which would either require more circuitry, or a processor of some kind. I can't make out what chips you've got in there... so if you are using something programmable already, ignore me! :D
User avatar
nathanscribe
VSE Review Contributor
VSE Review Contributor
 
Posts: 2936
Joined: Fri Aug 11, 2006 1:03 pm
Location: The right side of the Pennines

Re: Anyone need a MIDI to SYNC24 interface?

Postby synthparts » Wed Feb 15, 2012 2:32 pm

Like I mentioned before theres someone else who makes them and sells them on ebay all the time for $35-40. Yours needs to be cheaper or somehow better...
Vintage Synth Parts - http://www.synthparts.com
synthparts
Active Member
Active Member
 
Posts: 673
Joined: Sun Oct 09, 2011 12:05 pm
Location: SF Bay Area, CA

Next

Return to Buyer's Guide

Who is online

Users browsing this forum: No registered users and 3 guests