Ensoniq VFX SD service manual

Pulling out your hair? Don't know what to do or where to go? Ask in here.
Forum rules
READ: VSE Board-Wide Rules and Guidelines

If your Help request has been solved, please edit your first post in order to select the Image Topic Icon to let others know your topic has been solved.

Ensoniq VFX SD service manual

Postby vcs3 » Tue May 20, 2014 8:13 pm

I just pick a Ensoniq VFX SD with a few problems and need the service manual,
anyone as it?
Thanks.
User avatar
vcs3
Supporting Member!
Supporting Member!
 
Posts: 328
Joined: Sat Sep 17, 2005 9:22 am
Location: Lusitania
Gear: BitOne,DX7II, M-1000, ESQm, Procussion, NanoSynth, VL1, P2500, K5000R, FS1r, JX-3P, Ju-60,HR-16, CZ1000, RX-5,K2600S, Nord G1r, G2, XL-7, Shuthri-1

Advertisement:

Re: Ensoniq VFX SD service manual

Postby seamonkey » Tue May 20, 2014 11:16 pm

http://www.syntaur.com/vfx_manuals.html
Service manual $6.95 USD. :D
Moog Voyager Roland D50 Ensoniq VFX-SD, Korg Wavestation Emulator II, Emax SE Plus, Korg King Korg, Minibrute, Takamine Acoustic Peavey Falcon electric
User avatar
seamonkey
Active Member
Active Member
 
Posts: 742
Joined: Sun Nov 25, 2007 6:09 pm
Location: michigan
Real name: Rick

Re: Ensoniq VFX SD service manual

Postby rhino » Wed May 21, 2014 2:39 am

This is a handy guide to opening the synth, and checking the PS voltages. It is NOT A SCHEMATIC. Ensoniq took them to their corporate grave.
I have tried several times to talk Creative Labs into releasing them. Most times with frankly insulting 'talk-to-the-hand' results.
"A thing may seem impossible...until it's done."
--Nelson Mandela
User avatar
rhino
Supporting Member!
Supporting Member!
 
Posts: 2487
Joined: Sat Aug 02, 2008 5:00 pm
Location: kentucky hills
Real name: bill
Gear: keepers:
Kurzweil K2500x
Ensoniq TS-12
Yamaha SY-99
Alesis QS-8
Roland JD-800
Roland JX-10
Akai AX-80
Ensoniq SQ-80
Korg DSS-1
Moog Mini
Fizmo

Re: Ensoniq VFX SD service manual

Postby Ashe37 » Wed May 21, 2014 3:26 am

rhino wrote:This is a handy guide to opening the synth, and checking the PS voltages. It is NOT A SCHEMATIC. Ensoniq took them to their corporate grave.
I have tried several times to talk Creative Labs into releasing them. Most times with frankly insulting 'talk-to-the-hand' results.



I have VFX schematics...

schematics are not a service manual, either.
Ashe37
Moderator
Moderator
 
Posts: 2574
Joined: Mon Jan 19, 2009 3:43 pm
Location: Los Angeles, CA
Real name: Unpronounceable
Gear: Ensoniq SD-1/32,SQR,VFX,ESQm
Access Virus Indigo
Korg M3-61 , MS2000BR
Emu XL-7
Oberheim Matrix 6r
Yamaha TG-33, Kawai K3m
Blofeld, Micron, Mopho
Band: Eridani V

Re: Ensoniq VFX SD service manual

Postby rhino » Wed May 21, 2014 3:37 am

Fair enough. Help the fellow out.
"A thing may seem impossible...until it's done."
--Nelson Mandela
User avatar
rhino
Supporting Member!
Supporting Member!
 
Posts: 2487
Joined: Sat Aug 02, 2008 5:00 pm
Location: kentucky hills
Real name: bill
Gear: keepers:
Kurzweil K2500x
Ensoniq TS-12
Yamaha SY-99
Alesis QS-8
Roland JD-800
Roland JX-10
Akai AX-80
Ensoniq SQ-80
Korg DSS-1
Moog Mini
Fizmo

Re: Ensoniq VFX SD service manual

Postby EmptySet » Sat May 24, 2014 10:03 am

If you're like me, there's a good chance you're going to want to have Service Bulletin #12. This problem is one where it will fail calibration at boot sometimes or maybe all the time if it's really bad. (mine was intermittent). The story I read about this problem is that it plagued Ensoniq's engineers for a couple years almost. And it also affected more than one machine. I"ve even seen a document that had handwritten notes from the engineers talking to one another about the problem. They tried swapping out practically everything before they finally figured it out.

Basic gist is this… the VFX-SD has an achilles heal in its design. Namely, there are three circuitboards under the keybed that are tied together. Over time, the keybed being pressed causes this area to flex where the circuitboards are. This flexing eventually causes the ribbon cable connecting two of those boards together to fail. This will usually be seen in keyboard calibration failing at boot. But other times, it will boot just fine and even work for awhile; but as you play, the flex causes it to crash or do other weird things. It's a very common problem on VFX-SDs (and a couple other models if memory serves). If you have this problem, the good news is that the fix is pretty simple (albeit somewhat cumbersome). You simply solder new wires in place (or even in addition to) the existing ribbon cable. That's it!

Anyway, this information is hard to find despite being common. Here's a link to where you can view it.

http://imgur.com/xVVXW0d
User avatar
EmptySet
VSE Review Contributor
VSE Review Contributor
 
Posts: 463
Joined: Sun Jul 02, 2006 10:33 am
Location: Illinois, USA
Gear: MS20, x0xb0x, JV-1080, JX-3P, JX-8P(PG800), Juno Stage, VFX-SD, VL-1, ARP Omni I, D-50, DW6000

Re: Ensoniq VFX SD service manual

Postby Ashe37 » Sun May 25, 2014 9:38 pm

Its not just the VFX-SD, its the normal VFX as well. And it isn't really a ribbon cable, its a small PCB bridging two larger PCBs.

Image
Ashe37
Moderator
Moderator
 
Posts: 2574
Joined: Mon Jan 19, 2009 3:43 pm
Location: Los Angeles, CA
Real name: Unpronounceable
Gear: Ensoniq SD-1/32,SQR,VFX,ESQm
Access Virus Indigo
Korg M3-61 , MS2000BR
Emu XL-7
Oberheim Matrix 6r
Yamaha TG-33, Kawai K3m
Blofeld, Micron, Mopho
Band: Eridani V


Return to HELP!

Who is online

Users browsing this forum: No registered users and 11 guests