Thank you for the information regarding the fuses, I was wondering myself why these were missing in the first
place. I proceeded to replace the two missing fuses, but still can't get any power - the fuses did not blow, they
are still intact. Now, the synth does have a standard external fuse holder (typical screw-on cap) on the back of
the case, with a 200mA/250V fuse. I examined the fuse & it seems to be in order, HOWEVER, upon closer
examination I found that the "genius" who owned the unit prior decided to bypass this fuse by cutting the wires
leading to the fuse holder, and splicing them together!
Since the unit doesn't turn on anyway with this fuse bypassed, right now it's the least of my worries. However,
before I go ahead and re-splice the fuse into the circuit, I wanted to ask if the ratings on this fuse are correct?
As I mentioned above, the fuse I found in there was rated at 200mA/250Volt. Where should I go from here?