Native Instruments FM7

Native Instruments FM7 Image

The FM7 from NATIVE INSTRUMENTS could be the best software synthesizer ever! The FM7 is based upon the classic and legendary sounds of FM synthesis found in Yamaha's DX-series, from the DX7 to the DX200! The FM7's brilliant user-interface makes FM synthesis understandable, and for the first time, visually intuitive. And since the FM7 can import SysEx patch files, of which thousands can be downloaded from the internet, you have virtually every Yamaha FM synthesizer and more available to you in an easy to use and totally modern software plug-in compatible with every major computer music program (ASIO, MME, DirectX, SoundManager, VST, DXi, Audio Unit, RTAS, MAS, DirectConnect)! The FM7 can read all programs from the original DX7, DX7-II, DX11, TX81Z, TX7, DX21, DX27, DX100, TX802 and it reproduces the sounds of these machines exactly, if not better!

As part of NI's Vintage Line, the FM7 not only recreates the look and sound of DX-synths, but in many ways it surpasses what those original FM synthesizers could do. To get you started, it ships with two 128-patch banks of new sounds, a set of 128 DX200 patches, and the factory and some additional presets from the original vintage DX7. The FM7 is not just a DX emulator in the form of another software plug-in. It is a genuine FM algorithm synthesizer that takes the concept to the next level! It adds distortion and filter operators, extensive modulation capabilities, a comprehensive effects section, audio input and much more to the traditional FM architecture.

Native Instruments FM7 Image

The FM7 has eight operators, each of which can be selected and graphically edited on-screen or via MIDI controller. The first six operators (A-F) are modeled after the DX-series. Operators are unique to FM synthesis. Each one generates a waveform which can be used as a carrier (the sound that is heard) or a modulator (like the way an LFO is a wave that modulates an audible carrier wave). Whereas the original DX-synths only used sine waves for their operators, the FM7's operators offer a choice of 32 waveforms from simple sine to complex TX and formant waves. Additionally, the original FM synthesizers had 32 preset algorithms for designating and routing which operators will be carriers and/or modulators. FM7 has a fully programmable FM matrix in which you can freely adjust the signal routing from one operator to another, and you can even make the operators modulate themselves in a feedback loop. The original 32 DX-algorithms can be chosen from the FM Matrix's presets menu.

Native Instruments FM7 Screenshot

The frequency range, output level, stereo panning, velocity sensitivity, envelope rates, and amplitude modulation assignments for each operator are all easily edited on-screen or via MIDI controller in a way no old DX-synth could ever display! A graphical multi-stage envelope section borrowed from Absynth allows up to 30 points--that's way more than just the four points of a standard ADSR envelope. It comes with many preset envelopes, and it can be tempo synced. The last two operators (X and Z) offer new features not previously seen on DX-synths. Operator X offers a sophisticated noise and distortion generator. Operator Y has two multimode resonant filters.

The FM7 has a remarkable user-interface. It looks like a DX-synth with its brown/black color, green and red membrane buttons (that look depressed when clicked on). There's also a three digit display next to some LCD emulated display screens and a 6-octave keyboard. Clicking on the main LCD display toggles through a variety of information such as the name of the current patch, CPU usage, or current polyphony usage. There's also a lot of screen space which has allowed NI to give FM synthesis programming the visual representation it has desperately needed for decades. Creating your own FM sounds has truly never been this easy! And what's more, an "Easy" page gives you access to 20 sliders for somewhat global but common-place parameters such as Brightness, ADSR, Detune, LFO and Output settings. A "Master" section provides equally simple control of master input/output levels (yes there is an audio input as well), Chorus/Delay Effects, and some other overall sound shaping effects.

One of FM7's coolest features is its MIDI Learn function...just click on the "Learn" membrane button, click on a parameter that you would like to have controlled by a MIDI controller, then wiggle the controller knob and voila! You have just assigned a knob or slider on your MIDI controller to a parameter in FM7! This makes using FM7 with your MIDI controllers a snap, for either live or studio use. As a stand-alone application, the FM7 is a monotimbral instrument. But when used as a VST plug-in, up to 8 instances can be instanciated for multitimbral or ensemble applications. FM7's "Pitch" screen lets you adjust global pitch effects like the portamento and micro-tuning. The micro-tuning feature lets you adjust each note up or down a half step. A menu of preset micro-tunings from "Bagpipes" to "West Africa" shows you the sort of ethnic key scales you can create for your more ethnic sounds!

Clean sounding, punchy, and alive! That's how one could describe the world of sounds FM7 can create. Classic Rhodes and Wurlitzer sounds, percussive sounds ranging from the acoustic to the digitally industrial, synthy basses, leads, pads, strings, bells, drones, pulsing and throbbing effects, and all kinds of ethnic sounds and effects are all just a click away! It is used by Hans Zimmer. Download the demo for your Mac or PC from NATIVE INSTRUMENTS now!

Lookup Native Instruments FM7 Prices

The link above will take you to an eBay search for this synth to see active listings with more images, specs and information. If you don't find it there, try looking in our forum marketplace. Our marketplace gets thousands of visits every week so make sure to check back often if you want to buy or sell a synth.

Related forum topics


Are you looking to buy or sell a Native Instruments FM7? Post an ad in Gear For Sale or a request in Gear Wanted. For spare parts and repair services check out Gear Services & Other Goods. Our forums also has a Buyer’s Guide section where you can ask for advice on buying synthesizers.

20 Visitor comments
February 11, 2011 @ 5:31 pm
Had the Dx7 Dx9 Dx100. got rid of them because they became well boring. I backed up all the patches to an alesis data disc filer and sold them on. The I got Fm7 and It sounded fresh. I then decided to try the sys x import. and all my sounds loaded not exatly but pretty close and with some tweeking got them back. I prefer this to any DX that I've had, this virtual synth actually works the original was digital and so is the emulation its the VA synth I have the problem with. Recomend this if you want a DX series FM sound.
October 22, 2010 @ 11:25 pm
I m not sure the claim above is 100% correct, "it reproduces the sounds of these machines exactly, if not better!". It reproduced all the sounds from my TX7, EXCEPT the one I wanted the most, a long Brian Eno "Thursday Afternoon"-like subliminal elec-piano meets infinite sustain sound. Despite numerous tries importing the sys-ex, this sound just comes out as a blip. Does the FM7/8 have an issue with really long envelope sounds? Maybe I'm doing something wrong, anyone had a similar problem?
December 24, 2009 @ 1:37 am
I still like FM7, even over FM7. I like the layout, it feels like I am playing my Yamaha DX-1, which I am wanting to play. I will stick with FM7 as it does what I need and all I need. If you can find FM7 to download it, it is a great program still.
December 24, 2009 @ 12:14 am
This plugin turned me onto FM synthesis back in 2003, used it for textures, harpsicord, accordion, strings, ARP Quadra Genesis synth impersonation etc.. never even learned to program the thing but this interface is alot better than the real FM7 and that makes a difference when you're trying to be experi-mental
This thing also does some kind of unison thing a stock DX7 doesn't for some wonderful sounding Quadra like synth as I mentioned
I am trying to get a DX200 and go crazy with it
May 25, 2009 @ 6:43 am
True, but that last post was mainly about the original DX7 sound, not the FM7 (I'd forgotton how old the X-Files tune was). Test this for yourself, that timbre and pitch envelope is exact. Proteus-2 is sample based, it may have used several sources. However indirect the link, that sound is too close to 'Whistles', DX7 cartridge 4 bank B patch 19, to be a coincidence. It likely pre-dates anything like it because before the DX7 not many things could sound like that unless you had at least three sine waves to use. Mark Snow might not know where the Proteus sounds were made from, so you'll have to trust your own ears on this, test it to find out. Add a small slow decay on the envelope envelope too, that's something added since the original. It's too cool a sound to miss, whatever else might be said. I still contend that you could make something like that theme entirely on an FM7, there are enough tools there, and probably enough polyphony. Though maybe an FS1R might be a better bet.
VSE Rating


User Rating

Rated 4.06 (405 Votes)

  • Check Price
  • The link above will take you to an eBay search for this synth to see active listings. If you don't find it there, try looking in our forum marketplace or post a wanted classified.
  • Demos & Media
  • Audio Clip 1 - Flatron - FM7 Demo. Here's a great FM7 demo made using 8 VST instances of the FM7 only. Its percussion, synth leads, bass, pads and effects alone are enough to complete this entire trance track!

    Audio Clip 2 - Hear some more FM7 sounds, from Future Music issue 119.

  • Specifications
  • Polyphony - CPU Dependent
  • Oscillators - 6 FM Operators with 32 waveforms plus 1 distortion Operator and 1 dual resonant multimode filter Operator (with low/band/highpass)
  • LFO - 2 LFOs per voice, 32 waveforms each (same as in Operators), Sample-and-Hold, Modulation Matrix
  • Keyboard - 6-octave 73-note simulated keyboard (complete 12-octave 145-note keyboard range)
  • Effects - Stereo effects section with chorus, flanger delay, can be used for external audio signals; Unison mode, Portamento
  • Interfaces - Runs stand-alone with ASIO, MME, DirectX, Sound Manager, or as a plug-in using VST-2.0, MAS, DXi, Core Audio, RTAS, and DirectConnect
  • Macintosh - Mac OS 8.6 or higher, G4 400 MHz, 128 MB RAM, OMS or FreeMIDI
  • Windows/PC - Windows 98/ME/2000/XP, Pentium 450 MHz, 128 MB RAM, 16 bit sound card
  • Date Produced - 2002

Errors or Corrections? Send them here.