User Rating:
4.3 |33 votes Rate It
MF-102 Image
New Software Plug-In Version
A brand new analog Ring Modulator designed by Bob Moog himself. It works by multiplying a mono audio input with a carrier oscillator to produce the wild, famous and vintage ring modulator sound. The MF-102 is a Stomp-Box style Ring Mod with knobs to control LFO amount, LFO rate, Modulator frequency and Modulator Mix. The LFO can be switched between sine or square waveforms (0.1Hz to 25Hz). The carrier signal can be switched between low or high modes (2Hz to 4kHz).

Basically you can feed any mono sound into the MF-102: synth, sampler, DAT, record or microphone. The Carrier signal creates a frequency that will be multiplied to the input sound. This carrier signal is variable via the Modulator frequency knob, hi/low switch and Mix knob. The input sound can be levelled or overdriven using the Drive knob. The LFO is used to modulate the Carrier + Input sound for adding motion and sweeping effects to the cool ring mod effect. The MF-102 is classically endowed with CV (Control Voltage) control with which you can use to basically add a Moog ring mod to your existing analog CV/Gate synths. The MF-102 also has four expression pedal inputs for remote control of the knob parameters. A great analog effect from the Man himself. Use it as a stomp-box or as a modular add-on! Be sure and check out its companions, the MF-101 VCF Filter and MF-103 12-Stage Phaser. The MF-102 has been used by Fatboy Slim and the Crystal Method.

Email this page to someone...
Home | Synth Forums | Synth Classifieds | Synth Finder | TimeLine | Archives | Links | VSE Store




Presented by the Vintage Synth Explorer.
Copyright © 1997-, all rights reserved. All photographs, sounds,
patches, registered trademarks and logos are property of their respective owners.
E-mail Webmaster | Privacy Statement