Roland Gaia SH-01

Roland Gaia SH-01 Image

Following the SH-201, Roland continues its SH-series with the Gaia SH-01. The Gaia is an analog modeling synthesizer that retains the basic traits of previous SH-series synths: hands-on tweaking, user-friendly layout and compact design. You won't find any screens or menus on this synth—so if you're in the market for a hands-on, tactile synthesizer, the Roland Gaia SH-01 is not to be overlooked. There are 64 preset sound patches as well as 64 user patches—a huge improvement over the paltry 32 user patches in the SH-201. Weighing in at less than 10 pounds and able to run on battery power, the Gaia is a compact sound designing tool worthy of stage and studio.

The Gaia SH-01 features three oscillators, each with seven different waveforms (saw, square, pulse, triangle, sine, noise and super saw). Each of the seven waveforms have three variations, so it's almost like having 21 waveforms to choose from…per oscillator! Course tuning, fine tuning, oscillator sync and ring modulation controls, and a two-part (attack/decay) envelope generator complete the oscillator section. The filter section has all your basic controls (cutoff, resonance, a dedicated ADSR envelope generator) but also allows you to choose between low-pass, hi-pass, band-pass, or peaking filters. You can also bypass the filter entirely. The amp section controls the volume of the selected oscillator and has your standard ADSR envelope generator. The Gaia essentially offers three LFOs at your disposal (with controls for rate, tempo sync, delay time) that can be routed to any combination of the oscillator, filter or amp.

What makes the Gaia SH-01 stand out, is that although there is physically one oscillator, one filter, one amp and one LFO, you actually have three of each that are virtually layered over one another. In other words, this synth can sound huge! Many synthesizers have any number of oscillators that mix down before going to the filter and amp, but each Gaia oscillator has its own filter, amp and LFO, allowing for some very interesting patches. Furthermore, there is a dedicated master effects section featuring distortion, fuzz, bit crusher, flanger, phaser, pitch shifter, delay, panning delay, reverb and low boost. Each effect is highly tweak-able and really helps bring its sounds to life.

Of course, Roland has their "D-Beam" sensor for live performance fun (or just showing off to your friends). There is an onboard phrase recorder, arpeggiator, external audio input with various voice-canceling options, V-link support, 37-key keyboard with pitch/mod combo joystick, MIDI In/Out and USB connectivity to store patches to a thumb drive or use the bundled patch editor software. No MIDI-Thru may be an issue for some—the Gaia will need to be last in your daisy chain.

Roland Gaia SH-01 Image

The predecessor to the Gaia SH-01, the SH-201, notoriously felt cheaply made, particularly the keys and the plastic casing. The Gaia is still plastic, but the keys feel much better than the SH-201 and the Gaia feels less "hollow" and more robust than the SH-201.

For well under a thousand USD, you'd be challenged to find a better analog modeling hardware synthesizer. There is so much more to this synth than meets the eye. On top of the fact that you have three oscillator sections, filter sections, amp sections, and LFO sections that all mix down to the master effects section, there is a "Shift" button that allows you to adjust countless other parameters to further expand your synthesizing. Nearly every knob, button and fader has a second function via the "Shift" button. Roland could not fit all the "Shift" functions on the panel, but the manual contains a list of these parameters and they are logically laid out to help keep you planted in the groove of sonic exploration.

In summary, the Gaia SH-01 highly compliments the SH-series name and is more than worthy of carrying the name. Analog purists, forget about "analog vs. digital" and just give this synth a try, it's surprising how good analog modeling can sound when Roland does it right!

Lookup Roland Gaia SH-01 Prices

The link above will take you to an eBay search for this synth to see active listings with more images, specs and information. If you don't find it there, try looking in our forum marketplace. Our marketplace gets thousands of visits every week so make sure to check back often if you want to buy or sell a synth.

Related forum topics

Comments

Are you looking to buy or sell a Roland Gaia SH-01? Post an ad in Gear For Sale or a request in Gear Wanted. For spare parts and repair services check out Gear Services & Other Goods. Our forums also has a Buyer’s Guide section where you can ask for advice on buying synthesizers.

75 Visitor comments
nick
April 20, 2013 @ 11:52 pm
The best word to describe this synth is "charming".Snuff said.
Erwin
April 19, 2013 @ 12:30 pm
There is free software to download to make your own arps!
Erwin
April 19, 2013 @ 12:26 pm
Very nice synth. I have on second hand for only 400 euro with softcase. The first time I here the synth was with the Genesis Project, a Genesis coverband. All the solo sound came out of the Gaia. Very powerfull in the mix! The seventy sounds were very convinced sounding.
JnC
April 18, 2013 @ 11:04 pm
The Gaia was designed to teach subtractive synthesis. Later Rolands use the same virtual interface. A student learns on the Gaia, then graduates to the performance synths.

It even has a General Midi mode for use with an external sequencer.

Best strength: its speed & ease of copying a complete tone (LFO, OSC, Filter, Amp) to the other two tone slots to make a patch.

A limitation: the 64 arp presets aren't documented, and can't be edited from the keyboard.

Overall, this is a powerful hands-on synth without menu diving. MSRP is too high. At $300-400 used, it's just right.
Bestovitch
April 15, 2013 @ 3:47 pm
This synth isnt really the best, the filters sound pretty poor. For the money you could spend on this you could buy a Blofeld which is the better synth. Roland could do with waking up to what people want instead of rehashing things like the new Jupiter which has nothing to do with the original. Korg are leading the field these days with new gear that everyone wants and is affordable too. MS-20 mini for 500? Yes please :)
 
Post Comment!
VSE Rating

Excellent

User Rating

Rated 3.03 (404 Votes)

  • Check Price
  • The link above will take you to an eBay search for this synth to see active listings. If you don't find it there, try looking in our forum marketplace or post a wanted classified.
  • Specifications
  • Polyphony - 64 voices
  • Multitimbral - 16 parts (1 VA, 15 PCM)
  • Oscillators - Virtual analog synthesizer sound generator, PCM sound generator
  • Waveforms - Saw, Square, Pulse/PWM, Triangle, Sine, Noise, Super Saw
  • LFO - Waves: Triangle, Sine, Saw, Square, Sample-Hold. Controls: Rate, Fade Time, Pitch Depth, Filter Depth, Amp Depth.
  • Modulation - Oscillator Sync, Ring Modulation
  • Filter - LPF, HPF, BPF, PKG (-12 dB/-24 dB), Cutoff, Resonance, Key Follow, Attack, Decay, Sustain, Release, Envelope Depth
  • Envelope - Amp: Attack, Decay, Sustain, Release
  • Effects - Distortion, Fuzz, Bit Crash, Flanger, Phaser, Pitch Shifter, Delay, Panning Delay, Reverb, Low Boost
  • Vocoder - None
  • Sequencer - Phrase Recorder: 8 patches, 1 track
  • Arpeggiator - 64 patterns
  • Keyboard - 37 keys (velocity sensitive)
  • Memory - 64 Preset, 64 User
  • Control - MIDI In/Out, USB 2.0
  • Controls - Pitch Bend/Modulation lever, D Beam Controller
  • Weight - 4.2 kg (9 lbs. 5 oz.)
  • Date Produced - 2010

Errors or Corrections? Send them here.