Roland Juno-106

Roland Juno-106 Image

The Juno-106 is a very common and widely used analog polysynth. It continues to be one of the most popular analog synths due to its great sound and easy programmability. It was the next major incarnation of the Juno-series, following the Juno-60. While it has virtually the same synth engine as the Juno-60, the 106 added extensive MIDI control making it one of Roland's first MIDI-equipped synthesizers. There was also increased patch memory storage, up to 128 patches instead of the 56 patches available in the Juno-60. However, the Juno-60 is often said to have a slight sonic edge over the more advanced 106. The 60 had the ability to modulate oscillator pulse from its envelope and has a "punchier" sound quality.

The Juno-106 is a six-voice polyphonic and programable analog synth with one digitally controlled oscillator (DCO) per voice. While classic monophonic synths used two or three oscillators to create a fatter sound, the Juno-106 uses built-in Chorus to fatten up its sound to dramatic effect. The nature of its DCO meant it was stable and always in perfect tune but still warm and analog. There is an excellent 24dB/oct analog lowpass filter with plenty of resonance and self-oscillating possibilities and a non-resonant highpass filter. The programable pitch/mod bender can be assigned to control the DCO pitch, VCF cutoff, and LFO amount all at once or individually.

The Juno-106 was the first MIDI equipped Juno and its implementation is quite good. There are 16 MIDI channels available and MIDI SysEx data can be transmitted/received from all the sliders and buttons for total remote control and sequencing capability. A switch on the back of the keyboard, next to the MIDI ports allows the user to switch between three types of MIDI modes: Keyboard and Hold data only; Keyboard, Hold, Bender, Patch selection data; or All data (including SysEx). Most users simply set it to MIDI Function mode 3 and forget it.

This synth is incredibly straightforward and very powerful. It's SH-series derived panel layout is easy to understand and very hands-on. Use it to generate lush pads, filter sweeps, and funky bass lines and leads. The Juno-106 is an awesome learning tool for anyone new to analog synthesis, as well as an electronic musician's dream for its warm analog sounds coupled with modern features like MIDI and memory - all at a very reasonable price. And still the Juno-106 has an even cheaper alter-ego in the form of the HS-60 - a hobbyist version with built-in speakers.

The Juno-106 is one of the most loved and used synthesizers by professionals and hobbyists alike! William Ørbit, Überzone, Norman Cook (Fatboy Slim), Autechre, BT, Vince Clarke, Moby, 808 State, Underworld, Leftfield, Fluke, Josh Wink, Todd Terry, Depeche Mode, Eat Static, Biosphere, The Prodigy, The Shamen, Bushflange, Cirrus, Astral Projection, Apollo 440, Faithless, Union Jack, Computer Controlled, Pet Shop Boys, Sneaker Pimps, Erasure, Freddy Fresh, Rabbit in the Moon, Kevin Saunderson, Jimmy Edgar, Laurent Garnier, Vangelis, Sigur Ros, and the Chemical Brothers have used this synth extensively! It belongs in your studio!

Check Roland Juno-106 Prices on eBay

The link above will take you to a search for this synth to see active listings with more images, specs and information. If you don't find it there, try looking in our forum marketplace. Our marketplace gets thousands of visits every week so make sure to check back often if you want to buy or sell a synth.

Related forum topics

Comments

Are you looking to buy or sell a Roland Juno-106? Post an ad in Gear For Sale or a request in Gear Wanted. For spare parts and repair services check out Gear Services & Other Goods. Our forums also has a Buyer’s Guide section where you can ask for advice on buying synthesizers.

195 Visitor comments
soundtrackband
March 21, 2013 @ 4:04 am
This synth is well-known and often in a haggard state. The one I got had a dead C -1, then once I opened up and cleaned it, the notorious chip problem emerged.
After some research, I bought solvent, analyzed which chips (2 of them) were bad, desoldered and soaked them (you have to buy the better soldering gun with the air [beep] er attached). Resoldered them in and voila - perfection. I didn't even have to order the replacements you can get from Germany (not cheap).

I also bought a JX-3P for nostalgia, and that's a worthy and reliable keyboard, but the J106 is much thicker and versatile.
Mathyou
March 16, 2013 @ 12:15 pm
Dan Whitford from Cut Copy used the Roland Juno 106 for a live performance once.
nitemoves
February 22, 2013 @ 1:46 am
Limited, yes. Overpriced, absolutely. 1 osc per voice so no detuning voices and only 1 adsr to share between the amp and vcf. unison mode is a joke.

but at the same time, i love this synth and use it alot, second only to my polysix and arp odyssey. A great synth if you can find one for 3-400 bucks.
dave606
January 29, 2013 @ 3:28 pm
This Juno was also used by Ministry on the Twitch album.
BeN-HuR
January 17, 2013 @ 5:44 am
I have seen many studios in my time and most electronic producers world wide are using the 106 mostly for bass and other low freqs purposes. It is indeed very fast to program and light weight for tours.
 
Post Comment!
VSE Rating

Awesome!

User Rating

Rated 4.18 (1814 Votes)

  • Check Prices on eBay
  • The link above will take you to a search for this synth to see active listings. If you don't find it there, try looking in our forum marketplace or post a wanted classified.
  • Specifications
  • Polyphony - 6 voices
  • Oscillators - 1 DCO per voice: pulse, saw, and square
  • LFO - 1 with Rate and Delay
  • Filter - non-resonant high pass and resonant low pass (24 dB/oct)
  • VCA - ADSR, level and gate
  • Keyboard - 61 keys
  • Arpeg/Seq - None
  • Memory - 128 patches
  • Control - MIDI (In/Out/Thru)
  • Date Produced - 1984

Errors or Corrections? Send them here.