Roland System 700
The System 700 was a great big modular analog synthesizer system from Roland. A major player in the modular synth market, it competed against monsters like the Moog Modulars and the ARP 2500 & 2600. A very fat sounding synth. Incredible flexibility and great sound and design. Unfortunately this synth requires a lot of knowledge about synthesis and signal flow in order to maximize its full potential. Truly a professional instrument, even by today's standards! It is used by Vince Clarke of Erasure, Human League, Richard Barbieri, Vangelis, Nitzer Ebb, Aphex Twin, Hans Zimmer, and Depeche Mode.
The System 700 consists of the Main Console (pictured center), the Keyboard Controller, and five optional "blocks" (pictured above surrounding Main Console). A complete system as pictured above has a total of 47 modules (see Tech. Specs for modules info). Most System 700s were sold in the following configuration blocks:
"Block 1" (Main Console): This is the Heart of the System, and it contains all the basic modules necessary for a professional system. It has 3 VCOs, 2 VCFs, 2 VCAs, 2 LFOs, 2 ADSR egs, Noise, Ring Mod, Voltage Processor, S/H, Envelope Follower, "Integrater" (Lag Processor), Mixer, 2 X 5 multiples, Headphone Monitor Module, and an Output Module, which includes Stereo VUs, a six-position test-tone, Phase Shifter, Spring Reverb, and voltage controlled Panning. Most common module connections (power, cv, gate) are made internally for easier patching.
"Block 2" (Keyboard Controller): The 61-key two-voice Keyboard with Portamento and Pitchbend controls.
"Block 3" (Sequencer): a 3 X 12 step sequencer with Pulse Shaper, Clock Oscillator, and Series / Parallel output sections.
"Block 4" (VCO Bank): 6 VCOs, a dual ADSR envelope generator, LFO, Sample and Hold, 2 X 5 Multiples, and a small Mixer.
"Block 5" (VCF/VCA Bank): 2 VCFs, 3 VCAs, 2 dual ADSR envelope generators, 2 X 5 Multiples, and a Gate Delay.
"Block 6" (Interface/Mixer): a Frequency-to-Voltage Converter Interface, a VCA, 9-channel Audio Mixer, and a Fixed Filter Bank.
"Block 7" (Phase Shifter/Audio Delay): a 2-channel Phase Shifter and a 2-channel Audio Delay, 4 input Analog Switch, and a (1X12, 1X4, 1X8, 3X4) multiple.
Blocks 3 through 7 were options and could be arranged by the original owners in any way. Roland also released a Lab version, the "Laboratory System 700", the size of one lower wing cabinet with 3 VCOs, ring mod, VCA, mixer, LFO, Sample & Hold, Dual Envelope Generator, and VCF. Full Systems can cost as much as $18,000 and the Lab System is between $3,500 to $4,000!
Lookup Roland System 700 Prices
The link above will take you to an eBay search for this synth to see active listings with more images, specs and information. If you don't find it there, try looking in our forum marketplace. Our marketplace gets thousands of visits every week so make sure to check back often if you want to buy or sell a synth.
Related forum topics
Are you looking to buy or sell a Roland System 700? Post an ad in Gear For Sale or a request in Gear Wanted. For spare parts and repair services check out Gear Services & Other Goods. Our forums also has a Buyer’s Guide section where you can ask for advice on buying synthesizers.
- The link above will take you to an eBay search for this synth to see active listings. If you don't find it there, try looking in our forum marketplace or post a wanted classified.
- Polyphony - Monophonic
- Oscillators -
702A,B,C,D,E: VCOs with four waveforms (sine, triangle, sawtooth, and rectangle), PWM, and range knobs (LO to 2'), and a pitch control (+-12 semi-tones)
702A: has a PWM input and slider, and LFO1 mod input is hard-wired
702B: has a hard-wired ADSR1 and LFO1 modulation inputs and sync
702C: has a Sample & Hold and LFO1 input and sync
702D: like A but with a socket instead of hard-wired mod inputs
702E: like B&C without the hard-wired inputs
708A: Noise and Ring Modulators
- LFO -
706A,B: LFOs (rate/delay)
709A,B: Sample & Hold Modules
- Filter -
703B,C,D: 12dB VCFs
703E,F: 24dB VCFs
715A: Multimode Filter, Mixer
- VCA -
705A: Dual Envelopes
707A: Envelope Follower
- Arpeg/Seq - 717A: Analog Sequencer
- Keyboard - 701A: 5-octave 61-note keyboard
- Control - 712A: CV Processor
713A: Gate Delay
- Effects - 720B: 2-channel Phase Shifter
721B: 2-channel Audio Delay
- Misc. -
711A: Output module (Stereo VUs, a six-position test-tone, a Phase Shifter, a Spring Reverb, and voltage-controlled Panning)
714B: Frequency-to-Voltage Converter, Envelope Follower
718A: Power Supply
723A: Analog Switch
- Date Produced - 1976 - 1982
- Shop for Keyboards, MIDI & Gear
Errors or Corrections? Send them here.