 |
|
User Rating: |
|
The System 700 was a great big modular analog synthesizer system from Roland. A major player in the modular synth market, it competed against monsters like the Moog Modulars and the ARP 2500 & 2600. A very fat sounding synth. Incredible flexibility and great sound and design. Unfortunately this synth requires a lot of knowledge about synthesis and signal flow in order to maximize its full potential. Truly a professional instrument, even by today's standards! It is used by Vince Clarke of Erasure, Human League, Richard Barbieri, Vangelis, Nitzer Ebb, Aphex Twin, Hans Zimmer, and Depeche Mode.
The System 700 consists of the Main Console (pictured center), the Keyboard Controller, and five optional "blocks" (pictured above surrounding Main Console). A complete system as pictured above has a total of 47 modules (see Tech. Specs for modules info). Most System 700s were sold in the following configuration blocks:
"Block 1" (Main Console): This is the Heart of the System, and it contains all the basic modules necessary for a professional system. It has 3 VCOs, 2 VCFs, 2 VCAs, 2 LFOs, 2 ADSR egs, Noise, Ring Mod, Voltage Processor, S/H, Envelope Follower, "Integrater" (Lag Processor), Mixer, 2 X 5 multiples, Headphone Monitor Module, and an Output Module, which includes Stereo VUs, a six-position test-tone, Phase Shifter, Spring Reverb, and voltage controlled Panning. Most common module connections (power, cv, gate) are made internally for easier patching.Blocks 3 through 7 were options and could be arranged by the original owners in any way. Roland also released a Lab version, the "Laboratory System 700", the size of one lower wing cabinet with 3 VCOs, ring mod, VCA, mixer, LFO, Sample & Hold, Dual Envelope Generator, and VCF. Full Systems can cost as much as $18,000 and the Lab System is between $3,500 to $4,000!
"Block 2" (Keyboard Controller): The 61-key two-voice Keyboard with Portamento and Pitchbend controls.
"Block 3" (Sequencer): a 3 X 12 step sequencer with Pulse Shaper, Clock Oscillator, and Series / Parallel output sections.
"Block 4" (VCO Bank): 6 VCOs, a dual ADSR envelope generator, LFO, Sample and Hold, 2 X 5 Multiples, and a small Mixer.
"Block 5" (VCF/VCA Bank): 2 VCFs, 3 VCAs, 2 dual ADSR envelope generators, 2 X 5 Multiples, and a Gate Delay.
"Block 6" (Interface/Mixer): a Frequency-to-Voltage Converter Interface, a VCA, 9-channel Audio Mixer, and a Fixed Filter Bank.
"Block 7" (Phase Shifter/Audio Delay): a 2-channel Phase Shifter and a 2-channel Audio Delay, 4 input Analog Switch, and a (1X12, 1X4, 1X8, 3X4) multiple.
Email this page to someone...
Home | Synth Forums | Synth Classifieds | Synth Finder | TimeLine | Archives | Links | VSE Store
Presented by the Vintage Synth Explorer.
Copyright © 1997-, all rights reserved. All photographs, sounds,
patches, registered trademarks and logos are property of their respective owners.
E-mail Webmaster | Privacy Statement